Table saws as well as miter saws are equally popular in-home workshops and while each of them relies on different principles for cutting wood, their uses still overlap in certain areas.
In this article we will be comparing the table saw vs miter saw, we’ll tell you about all the important information you need to know regarding this topic, including the main differences that exist between the two.
The Differences – Table Saw vs Miter Saw
- A Table Saw Is More Efficient For Cutting The Large Pieces Of Wood While A Miter Saw Is More Efficient For Cutting Angles
The table saw features the flat table supporting wood while it is being cut. A user controls as well as pushes a wood and then feeds it into the spinning saw blade in a table’s center, making it a great tool you can use for cutting large pieces.
With the miter saw, you simply place the strip of wood, like a siding plank or trim board, on the narrow base exactly at the front of a saw, after which you manually lower a spinning blade (through the handle encased in the moveable head) for cutting off the strip’s end.
As for the miter, it can make cutting angles a snap. Its head might be swiveled from the side for cutting any degree angle necessary.
Exactly for this reason, a miter saw is the staple of a trim carpentry industry since they can cut the complex angles to install trim as well as crown molding.
It is much more difficult or laborious to cut angles with the table saw since a user needs to position a wood at the proper angle, holding it steady all the while feeding it through a spinning blade.
- Compared To A Table Saw, A Miter Saw Is More Portable
Even though certain table saws can come with wheeled stands allowing you to easily roll them when needed, the majority of table saws are stationary since they are built into the cabinet or bolted to the solid steel legs, making them unwieldy, heavy, and very difficult to move.
The majority of miter saws are quite heavy; in the fifty to the sixty-pound range, which can usually be loaded in a trunk of the car or the back of the pickup truck, or you can just carry them where you need them. If your intention is to create all the woodworking projects in the workshop, then the miter saw may be bolted to the immobile counter top in order to make it stationary.
- A Miter Saw Is More Precise Than A Table Saw
The miter saw is much more precise since the wood is snugly held against the back of a saw throughout the entire cut.
With the table saw, wood is always in motion, and in case a user varies a pressure on wood while it is being pushed into a blade, then it may cause somewhat jagged areas on a cut edge of a board.
A slight imprecision that may occur on a table saw cuts will not usually affect large projects, however, it may still result in an amateurish look if you install trim. In other words, when precise cuts are essential, you should use the miter saw as you can’t really use the table saw in such a case.
Can You Use The Miter Saw As The Table Saw?
It would be hard to use the miter saw as the table saw considering all the existing differences in their design.
The table saw does not have restrictions around it, meaning it is suitable for the rip-cuts as well as working with the larger stock materials.
As for the miter saw, it can cut accurate ninety as well as forty-five-degree angles, however, only on the smaller work pieces. It comes with the pivoting arm sitting directly behind a blade that restricts the size of the material.
As you can see, there are some important differences between a table saw and a miter saw. In case you’d like to know which one is better, the answer is that both have their own merits. It just depends on the task; the table saw can make light work of much more substantial material, and the miter saw can give the project the professional finish it requires.